Load Cells

Accuway TM with handheld readouts
Handheld Readouts.
Made from a Lightweight Aerospace Alloy.
Available Hermetically sealed for use in wet conditions.
Units have a 5 metre cable close coupled to a 4 digit 15mm LCD display.
Tare, Peak and Reset facility.
The power source is a 9V PP3 battery, can be supplied for mains power if required (240v).
All units are calibrated to comply with ISO 7500-1: 2004.
The accuracy of the cells are better then 1% of applied load.
Complete with carry case.
12 Month Guarantee, subject to conditions.
Options:
12V Mains Operation
Monitor can be supplied with a socket for operation from a mains plug top, 240 to 12 volt power supply.
The unit can be scaled Tonne, Kilograms or KN’s
The above can be supplied with longer monitor cables if required
Range of sizes we offer are: 2.0 tonne, 5.0 tonne, 10.0 tonne, 20.0 tonne, 50.0 tonne & 100.0 tonne. Plus specials

nb: Does not come with Shackles

Accuway TMIR - Infrared Operation

The cell is manufactured in aluminium alloy with HT steel bushes.
The cell incorporates an eight gauge bridge together with associated electronics and a 9 volt PP3 non-rechargeable battery.
Built into the load cell is a large <Actinic:Variable Name = '20mm'/> 3.5 digit liquid crystal display mounted on the front of the cell for easy reading from the operator’s position.
The load cell is self contained and has no external cabling.
A battery switch is provided on the rear of the cell to prolong battery life when the cell is out of use.
All set up and calibration data is retained when switched off.
The cell is automatically switched off after 15 minutes to prolong battery life.
Battery life – typically 50 hours.

Note :- The tare and peak readings are stored even after an automatic 15 minute shut down, the tare and peak reading being returned at next ‘on’ press of the remote, [provided the cell rear button has not been switched off.] * Automatic range change is available when appropriate.

nb: Does not come with Shackles