Bondloc

Low Viscosity adhesive exhibiting extremely quick cure times.
Full Cure Time: 24 Hours

Low Viscosity ethyl cyanoacrylate designed specifically for bonding rubbers and plastics.
Full Cure Time: 24 Hours

Higher Viscosity adhesive for application to more uneven surfaces yet retaining fast cure speeds.
Full Cure Time: 24 Hours

Cure speed is slower, thus allowing re- positioning of components.
Full Cure Time: 24 Hours

Simple to apply and bonds a wide range of plastics
Cures in 15 minutes
Supplied in a 28ml hand syringe

Plastic bonding system that is even stronger than epoxy, 3,500 psi, and sets in 15 minutes. Bonds plastic to plastic, plastic to metal, and metal to metal. The thick formula fills gaps, it is high impact and water resistant, easy to mix and requires minimal surface preparation.Please note: We are not allowed to sell butane or solvent based products to persons under the age of 18.

High strength permanent adhesive tab is ideal for studs and bolts, etc.
Bonds metal to metal
Vibration and shock resistant
Supplied in a 25ml bottle

Bondloc B270 is designed for high strength thread locking applications on metals where the components do not require disassembly or adjustments at a later date.Please note: We are not allowed to sell butane or solvent based products to persons under the age of 18.

Low strength adhesive that is ideal for small set screws and fine threaded nuts, etc.
Bonds metal to metal
Vibration and shock resistant
Supplied in a 25ml plastic bottle

Bondloc B222 is designed for low strength threadlocking applications on metals where the components require disassembly or adjustments at a later date without stripping the threads.Please note: We are not allowed to sell butane or solvent based products to persons under the age of 18.

The quickest setting epoxy you can buy.
Simple to apply
Bonds a wide range of materials
Cures in 60 seconds
Supplied in a handy 28ml hand syringe

Waterproof, impact resistant and high strength. Because this product is so fast, we’ve included a blue dye. When you mix the product quickly, you’ll know you’re ready to use it when the blue dye disappears (about 15 seconds). All purpose. Strength 1250 psi.Please note: We are not allowed to sell butane or solvent based products to persons under the age of 18.

For repairing gouges or holes in metal, wood, plastics, ceramics, stone and concrete
Emergency repair of leaking pipes/tanks
Cures on wet (leaking) parts
Reduces down time and eliminates the need for expensive machining
Can be drilled, sanded, tapped within 20 minutes of mixing
Can be painted over when fully cured (24hrs)
Fully cures to a very hard finish
Colour when mixed - dark grey

For repairing gouges or holes in metal, wood, plastics, ceramics, stone and concrete
Emergency repair of leaking pipes/tanks
Cures on wet (leaking) parts
Reduces down time and eliminates the need for expensive machining
Can be drilled, sanded, tapped within 20 minutes of mixing
Can be painted over when fully cured (24hrs)
Fully cures to a very hard finish
Colour when mixed - dark grey